Biodiesel titration kit: what is needed, where to get it

To do a titration, we’ll usually build a titration kit, and what it consists of is everything we need to do a titration and make one. To start, you will need some distilled water. The reason you want it distilled is because water is 0 pH, it is neutral, in other words, with pH. Kay, so you need some distilled water. You’re going to need some rubbing alcohol. It is important that it is isopropyl alcohol and not methyl. I like to be as pure as I can. This is 91% isopropyl alcohol, from the small local grocery store. I’m going to need a sealable jar or jar that can hold a liter of water, because this is what I’m going to do, and I’m going to put my titration solution in there so I can reuse it multiple times.

It’s important that if you put it in a pot that might look like water, you mark it with a warning so no one ever drinks because this is poisonous, which we’re going to do. You will also need some containers to do your titration. These are simple little cups with milliliter markings on the side, if you visit your local supermarket you can find some of these too, usually on the kitchen island. Then you will also need a container with graduations up to one liter because this is what we are going to use to mix our titration solution. You will need a scale that is accurate to within 0.01 of a gram. This scale is called the gem scale. We use it jewelry to measure karats and things like that. It works pretty well too. But basically any scale is going to be a digital or balance scale that can measure to an accuracy of 0.01 of a gram.

You will also need some syringes that have milliliter markings. You can go to a grocery store on the pharmacy island and pick up some of these too. I have a variety of syringes to do various things, but these go up to five milliliters, and then I have these little bulbs that allow me to be extremely precise with how many drops of titrant are put in to see where I am. . You will also need a pH indicator. This is phenolphalylene. It’s a one percent solution of phenolphylene, and that’s what the pH will indicate when it goes above 8.5, 8 or less. It will basically tell us when we’ve neutralized all the acid, so we’ll use this.

I have a little funnel that I like to have around that I can do my solution with. I also have some safety gloves. It’s important to wear a safety guard when you do this because you’ll be messing with some chemicals, particularly the catalyst, whether it’s sodium hydroxide or potassium hydroxide. You’re also going to need some catalyst. In particular, it concerns potassium hydroxide.

Whatever you plan to make your biodiesel with, be it sodium hydroxide or potassium hydroxide, it should be the same chemical you use when you make your titration solution. You can do the math to do the conversions, but you get much more reliable titrations if you use the same chemical. That’s basically what makes up a basic titration kit. Titration kits can be obtained on the Internet from various sources.

You can go to Walmart and build one. Expect to pay a little for shipping because they have to ship chemicals in them. Phenolphaylene can also be ordered online from a number of different places. You can get it at chemical stores. A good scale that you can find on eBay or different things like that. So that’s what you need to do a basic degree.